OASEALANT 221
Additional files
TE-OASEALANT_221.pdfAPPLICATION
● Joint sides must be sound, clean, dry and free from dust, oil and grease.
Paint residues must be completely removed.
Paint residues must be completely removed.
● Insert backup material to assure correct joint depth and to prevent three-sided joints.
The depth of joint should be 1/2 – 2/3 smaller than the width of joint.
The depth of joint should be 1/2 – 2/3 smaller than the width of joint.
● Use marking tape on both joint sides, for neat and clean straight flanks.
● Apply BP-333 primer on joint flanks only. Allow the primer to cure prior to apply the sealant.
● Fill joint completely with sealant. Cut nozzle, place in caulking gun and puncture seal inside spout.
Ensure there are no cracks.
● Remove protective tape after placing the sealant; do not apply when the material is wet.
PACKAGING & STORAGE
Component A:10 kg
Component B: 5 kg
● The product must be stored properly in original, unopened and undamaged sealed packaging in dry conditions
at temperatures between 0°C and +25°C. Higher storage temperatures may reduce shelf life of product.
at temperatures between 0°C and +25°C. Higher storage temperatures may reduce shelf life of product.